Denticon Software in 2026: Requirements, Pricing Terms and the IT Side
"This is a cost saving move." A two-office owner wrote that on a dentists' forum in March 2026, explaining why he was pricing Open Dental Cloud against the Denticon he had run since 2011. His next lines were about x-rays in the cloud, a server he wanted gone, and an external drive that "hadn't backed up for months." Those are IT questions, and a sales demo never reaches them.
This guide reads Planet DDS's own pages, its help center, its status page and its published subscription agreement (all checked on 6 November 2026) from the IT side: what Denticon needs from your computers and internet, how imaging reaches it, what happens when the internet or Denticon is down, who backs up what, how sign-ins are controlled, what a conversion leaves to your team, what the contract charges for, and what your IT provider still owns after you sign.
Denticon is Planet DDS's browser-based practice management system, sold by location count to single offices and DSOs. Planet DDS hosts the database and its backups; your office still owns Windows computers that meet its requirements, Chrome or Edge, the internet line, every sensor and imaging bridge, and the data export you must run before you leave.
- Planet DDS hosts the Denticon database and its backups; the agreement makes computers, software, internet and every other local technology the client's responsibility.
- The public requirements page still says Windows 10, but the help center asks for a current Windows and a current Chrome or Edge, a weekly cache clear and no interfering extensions; plan to the help-center standard.
- Bandwidth is a per-computer rule (1 Mbps down, 512 kbps up each) and XVWeb imaging needs at least 20 Mbps down and 10 Mbps up; upload speed is the number to measure.
- Imaging reaches Denticon through the XVWeb extension and bridge or the Denticon Bridge Service, which must be installed on every capture and viewing PC; Sidexis 4.3 and 4.4 are listed as not compatible.
- The status page showed 16 incidents in the 90 days to 6 November 2026, 12 of them Denticon-related; the service level addendum promises 99.5% monthly uptime but excludes outages under 15 minutes and your own internet line.
- Export is the customer's sole responsibility before termination, XVWeb image exports can cost $995 per extract, and under the September 2026 terms leaving early means paying the rest of the term; build a monthly export habit.
In this guide
- What is Denticon, and who is Planet DDS building it for?
- What does Denticon need from your computers, browser and internet?
- How does imaging work with Denticon: Apteryx XVWeb, the Denticon Bridge and 3D?
- What happens when the internet or Denticon itself is down?
- Who backs up what with Denticon, and how do you get your data out?
- How does Denticon control sign-ins, sessions and remote access?
- What does moving to Denticon involve, and what does the conversion leave to your team?
- What does Denticon cost, and which IT costs actually change?
- Does Denticon fit a group, and what should the group's IT standardise?
- The IT side: what your IT provider owns with Denticon
- Twelve things to confirm in writing before signing with Denticon
- What to ask your IT provider about Denticon
- How Legend Networking can help
- Frequently asked questions
- The bottom line
What is Denticon, and who is Planet DDS building it for?
Planet DDS's Denticon is a practice management system that runs entirely in a web browser. Planet DDS sells it in three plans sized by location count and positions it for groups and DSOs, with Apteryx cloud imaging, patient communication and analytics sold alongside. In July 2026 the company folded these into a platform it calls DentalOS.
Planet DDS says Denticon has been "Tried and tested by more than 13,000+ dental practices" and that it offers "Over 25 integrations." Its DentalOS launch release (17 July 2026) says the platform "will be available at no additional cost to Planet DDS customers" and that its solutions are "used across 14,500 practices and 175,000 users." These are the vendor's figures. The pricing page sets out the plans: Essentials, "Best for practices with 1–2 locations"; Pro, "Best for 3–19 locations"; and Enterprise, "For 20+ locations." The product page describes the system as "built to help DSOs scale," and gives an average transfer time of "60 days" for a solo practice and "8 weeks per location for DSOs."
The first thing to settle is what Denticon takes off your hands and what it does not. The vendor's own Software-as-a-Service Agreement (last updated 1 September 2026) is blunt about the second half: under section 12, "Customer is solely responsible for acquiring, servicing, maintaining, and updating adequate equipment, computers, software, communications services (such as internet connectivity charges) and all other technology and services not owned or operated by or on behalf of Planet DDS." The table below is that clause applied to a dental office.
| Component | Where it lives with Denticon | Who owns it day to day |
|---|---|---|
| Patient database, schedule, ledger, charts, reports | Planet DDS hosting; the agreement says data is hosted "in secure, U.S. based facilities" | Planet DDS |
| Application updates | Pushed by Planet DDS in scheduled "New Denticon Version" windows, roughly every two weeks | Planet DDS |
| Database backups and replication | Planet DDS: backups "throughout the day, nightly, and weekly," replicated to a disaster recovery site | Planet DDS |
| Your own copy of your data | Scheduled data downloads, nightly BCP files over SFTP, image exports | You and your IT provider |
| Windows computers, Chrome or Edge, Adobe Reader, pop-up and extension settings | Every workstation and operatory PC | You and your IT provider |
| X-ray capture: sensors, drivers, XVWeb capture software or a bridged imaging suite | A Windows computer in each operatory | You and your IT provider |
| 3D scans (CBCT) | The scanner's own software and storage, bridged from XVWeb where supported | You and your IT provider |
| Internet line, router, firewall, Wi-Fi, cabling, a second connection | Your office | You and your IT provider |
| Scanners, signature pads, label printers, card terminals | Your office, with Windows drivers | You and your IT provider |
| Documents outside Denticon (scans, letters, exports, email, payroll) | Your computers, Microsoft 365 or a file share | You and your IT provider |
Vendor statements from planetdds.com pages and the Software-as-a-Service Agreement (last updated 1 September 2026) read on 6 November 2026; the ownership column is the usual split in a practice, not a contract term.
If you are still choosing between hosted systems, start with our guide to cloud-based dental practice management software compared, which puts Denticon beside Dentrix Ascend, Open Dental Cloud, Curve and four others, or the wider dental practice management software compared guide. This page goes deeper on Denticon alone; for everything else in the building, see the full technology stack a dental office runs.
What does Denticon need from your computers, browser and internet?
Planet DDS publishes a minimum-requirements table (Windows 10, Intel i3, 4 GB of RAM, 3 Mbps down and 1 Mbps up, Chrome or Edge), but its help center asks for more: a current Windows, a current browser, a weekly cache clear, no interfering extensions, and bandwidth that scales per computer. Plan to the help-center standard, not the public table.
The vendor's three documents disagree with each other, which matters when a support ticket is refused because a computer is "below requirements." Here they are side by side.
| Item | Public "Minimum System Requirements" page | Help center "Expected Device Environment" (updated 14 Aug 2026) | Help center bandwidth and router articles |
|---|---|---|---|
| Operating system | "Windows 10" | "A current version of the Windows operating system must be used" (it names Windows 11 as the current version) | Older table still lists "Windows 8.1 or higher" minimum, "Windows 10 64bit" recommended |
| Browser | "Chrome, Edge" | "A current version of the web browser Microsoft Edge or Google Chrome must be used" | Older table lists Chrome or Internet Explorer 11 |
| Unsupported browsers | Not stated | Supported Browsers article (24 Sep 2026): AVG Secure, Brave, Firefox, Opera, Safari, Internet Explorer; "Denticon Support will not be able to resolve the issue" on an unsupported browser | Not stated |
| Processor and memory | "Intel i3 or higher," "4 GB of RAM" | Not stated | Recommended "Intel or AMD 2Ghz or higher," "8GB" |
| Disk and display | "80 GB," "SVGA 1200 x 800" | Not stated | Recommended "250GB or larger, 7200rpm or faster or SSD," "SVGA 1920x1080/1080P" |
| Internet | "3 Mbps down / 1 Mbps up" | Not stated | "a minimum bandwidth of 1mbps download and 512kbps upload" per computer: "if an office has 10 computers, the minimum recommended speeds for the office's internet connection would then be 10mbps download and 5mbps upload"; recommended "10Mbps down/2Mbps up" |
| Mac, iPad, iPhone | Not stated | Not stated | Apple article: "Denticon is not programmed to operate on MacOS or iOS computer"; a Mac needs Boot Camp or Parallels, and "all peripheral software supporting scanners, signature pads, and x-rays is programmed for the Microsoft Windows environment" |
| Launch and housekeeping | Adobe Acrobat Reader "Latest version" | "Denticon must be launched from PlanetDDS.com via the I'm A Client menu"; "A recently cleared cache (ideally once a week for best performance)"; "No extensions known to cause issues installed in your browser (MacAfee, Adobe Acrobat, NexHealth, etc.)" | Workstation article: "Make sure all pop-up blockers are removed and all pop-ups from Denticon are always allowed"; "Do not save any direct shortcuts to login" |
All three sources read on 6 November 2026. Planet DDS updates help-center articles without changing the public page; re-check both before a workstation refresh.
Windows 10 on the public page, a current Windows in the help center
The public table still says "Windows 10." Microsoft's lifecycle page says "Windows 10 will reach end of support on October 14, 2025," so a Windows 10 computer that meets Denticon's published minimum has not received an operating-system security update in over a year unless it is enrolled in Extended Security Updates. Google's Chrome requirements page lists Windows 10 as still supported, with a Chrome deprecation "Not yet scheduled," so the browser keeps updating while the operating system underneath it does not. The help center's device-environment article resolves the conflict by asking for a current Windows. Treat Windows 11 as the real requirement and use our Windows 10 end of life for dental practices guide for the replacement order.
Browser rules your IT provider has to enforce
Denticon's help center reads like a configuration standard, and an IT provider can turn it into one. The rules that generate tickets when they are missed:
- Sign in from planetdds.com, not a saved shortcut; Chrome "automatically saves the most used page into a shortcut," which the vendor says to avoid.
- Allow pop-ups for Denticon on every computer; the schedule and task manager open as pop-ups.
- Keep Chrome and Edge current and clear the cache about weekly; the vendor's first troubleshooting step is often a cache clear.
- Remove extensions the vendor names as troublemakers: McAfee WebAdvisor, Adobe Acrobat and NexHealth's extension.
- Keep to two Denticon windows, the patient window and the scheduler; the help center says the program "is programmed to work with only two Chrome or Microsoft Edge windows open," and closing one session can log out the others.
- Accept cookies and keep the computer clock accurate; sessions "expire a maximum of 120 minutes (two hours) after you have logged in," and a wrong system time can end them at once.
- Since Chrome 142, allow local network access when Denticon first talks to a scanner, signature pad or other connected device. The vendor's September 2026 article describes a new browser prompt on "Denticon screens that utilize connected devices," with a per-computer fix (reset site permissions, then "Allow") and a fleet fix for groups: "Set the policy to allow local network access for *.denticon.com" in the Chrome Enterprise Admin Console.
That last item is why a group should manage Chrome centrally. A policy set once in the admin console beats resetting permissions on thirty front desks after a browser update.
Bandwidth: a per-computer rule, not an office figure
The help center's rule is the one to size against: 1 Mbps down and 512 kbps up per computer running Denticon, so an office with a dozen workstations should plan at least 12 Mbps down and 6 Mbps up before imaging. Apteryx XVWeb has its own figures: "Minimum: 20MB down / 10MB up Recommended: 40MB down / 15MB up." Upload is the number most offices never check, and it is the one that stalls a full-mouth series. The vendor's own slowness checklist asks whether the slow computer is also streaming video or audio, where the router sits relative to the workstations, and how many computers share one router; a separate article describes offices where everyone connects "through the same portal (router, modem)" and Denticon screens lock up while other websites load. Wired operatories, a business-grade router and a measured upload speed are the dental office network setup basics that make a browser PMS feel fast.
How does imaging work with Denticon: Apteryx XVWeb, the Denticon Bridge and 3D?
Images reach Denticon by one of three paths. Apteryx XVWeb, Planet DDS's cloud imaging, captures through a browser extension and a local bridge application on a Windows PC. The Denticon Bridge Service launches a third-party imaging suite such as DEXIS or Romexis for the selected patient. Without a bridge, staff open the imaging software by hand and find the patient.
| Path | What runs in the operatory | Best for | Watch for |
|---|---|---|---|
| Apteryx XVWeb (included as "Pro Limited" on Essentials and "Pro Unlimited" on Pro and Enterprise) | The XVWeb Browser Extension, "XVWebBridge – an application that runs on your local system," and Apteryx capture software (XVWeb Capture, XrayVision or XrayVision DCV) on Windows; sensor drivers from the sensor maker | Offices that want one vendor for PMS and imaging, groups standardising capture | XVWeb viewing needs at least "Microsoft Windows 8.1 Chrome, Edge or Firefox (latest versions) 4 GB RAM"; capture needs the full extension-plus-bridge install on every capture station; "All 3rd party sensor drivers and calibration files are to be provided and maintained by the sensor manufacturer" |
| Denticon Bridge Service to a third-party imaging suite | The Bridge Service tray application on every machine that captures or views images, plus the imaging suite and its drivers | Offices keeping DEXIS, Carestream, Planmeca Romexis, Schick, XDR, Dolphin or similar | The compatibility list (updated 21 Aug 2026) says "Sirona (Sidexis) Imaging (Not compatible with the latest version 4.3 and 4.4)"; EzDenti and Sopro "Only works with Google Chrome"; some suites need "a Windows registry entry" created by Denticon's imaging technicians |
| No bridge | The imaging suite's own desktop shortcut | A fallback when the bridge fails or during an outage | Staff "need to search for the patient in the imaging software" by hand; images taken while the bridge is down sync later once it is restored |
| 3D and CBCT | The scanner's own 3D software and storage; the XVWeb 3D add-on needs "Google Chrome," an "Intel i3 CPU or higher," "2GB RAM" and a "Graphics processor (1GB dedicated RAM) with DirectX10 or above" | Offices with a CBCT unit | A Third-Party Application Bridge launched 1 October 2026 for "Carestream Imaging 8, Carestream 3D (CS 3D), and Vatech EzDent-I / Ez3D-I," with "Planmeca Romexis support is coming shortly after launch"; volumes still live where the 3D software stores them |
Planet DDS help-center articles read on 6 November 2026. Bridge compatibility changes by version; the help center says to check "your account's office setup screen" for the current list.
Two details decide how many tickets the bridge path generates. First, the Bridge Service runs as a Windows application that logs to the signed-in user's roaming profile folder (the troubleshooting guide names the DenticonBridgeService logs under the user's AppData folder) and launches each suite through a registry key and a command line specific to that product; when a suite updates, as the Sidexis 4.3 and 4.4 note shows, the bridge can stop working until Planet DDS catches up. Second, the vendor's upgrade FAQ for Bridge 2.0 states the rule for scope: "Any machine that captures X-rays along with any machine where X-rays are viewed within Denticon will need to be upgraded." Every viewing PC, not just the operatories, carries the install.
For sensor-level problems, which are driver problems whichever PMS you run, see our guide to dental imaging software and what it needs from your network, the imaging integration troubleshooting steps, and what to do about a sensor that stopped working after a Windows update.
What happens when the internet or Denticon itself is down?
Denticon has no local database, so an internet outage stops scheduling, charting and billing until the line returns. Planet DDS offers a backup site with last night's routing slips and limited offline x-ray capture. Its uptime commitment excludes your own internet line and outages under 15 minutes, so the failover plan is yours.
Three vendor facts set the shape of that plan:
- Backup.Denticon.com "will allow you to Print your schedule, Routing Slips as of 'last night'," using the same Denticon credentials. The reports "are generated with the information synced as of last night 11:55pm PST and does not reflect changes made today." It is a read-only snapshot, not a working system.
- On the internet itself, the help center's answer to "What if my internet goes down?" is that "some of our customers subscribe to a wireless card to connect to the cloud via cell network in the event that their day-to-day internet connection goes offline."
- The agreement's availability clause (section 13) says "Customer acknowledges that functionality of the Services may at times be unavailable and outages may occur," promises "commercially reasonable efforts" to keep the service up "twenty-four (24) hours a day, seven (7) days a week," and excepts "planned downtime (typically during weekend off-hours)." The status page shows the planned windows actually fall on Thursday evenings, Pacific time, about every two weeks.
- The Denticon Service Level Addendum (last updated 1 September 2026) adds a number: Planet DDS commits to at least 99.5 percent "Service Uptime, as calculated over a calendar month," where Service Uptime is the share of the month in which the service is "accessible from a working internet connection." It does not count downtime that "lasts for less than 15 minutes," scheduled downtime, failures of "communication or internet services," your own equipment, or third-party systems. A missed month earns a credit of 10% of that month's fees for the affected service (uptime from 98.0% up to the commitment) or 20% (below 98.0%), and only if you ask in writing within 30 days.
What the status page shows
Planet DDS runs a public status page with an incident history. Pulled through its status API on 6 November 2026, the page returned 50 incidents going back to 21 October 2025. Sixteen of them fell in the 90 days to 6 November, and twelve of those carried Denticon in the title or affected component. The recent Denticon-titled entries:
| Date (2026) | Incident title on status.planetdds.com | Vendor impact label | What it meant at the front desk |
|---|---|---|---|
| 3 Nov | Denticon: Incorrect Patient Loading from Patient Overview Actions | none | A data-display fault; staff verify the open patient before posting |
| 28 Oct | Denticon patient appointment request timing out | major | Online appointment requests failed; phones carry the load |
| 27 Oct | Denticon login issues | minor | Error page after sign-in from about 06:00 to 07:40 Pacific; the update names a Cloudflare problem |
| 7 Oct | Denticon unavailable to some users | none | Some users could not sign in, others were slow, for about 18 minutes |
| 2 Oct | Denticon - Patient details slow to update on screen | none | Slow screens; the slowness checklist points at the office first |
| 28 Sep | Clearinghouse incident impacting Denticon and Cloud 9 (DentalXChange) | critical | Claims and eligibility stalled while the PMS stayed up |
| 25 Sep | Denticon DPA is unavailable | major | A Denticon component outage |
| 11 Sep | Denticon login issues. | major | Sign-in failures for about 13 minutes in the evening |
| 14 Aug, 31 Jul | Denticon Slowness | minor / none | Vendor-side slowness, the kind the office cannot fix |
Source: status.planetdds.com incident history via its status API, 6 November 2026. Earlier entries include Azure-related degradation on 21 and 29 October 2025. Scheduled "New Denticon Version" maintenance ran on 5 Nov, 22 Oct, 8 Oct and 24 Sep 2026, each a one-hour evening window.
Three of the twelve Denticon-related incidents in those 90 days were DentalXChange clearinghouse problems (28 September and two on 1 September), and two of the older entries name Microsoft Azure, which tells you where the dependency chain runs: your line, Cloudflare, Planet DDS's hosting, and the clearinghouse. An office can only control the first link. The service level addendum also explains why short incidents rarely show up as credits: the 13-minute sign-in failure on 11 September falls under its 15-minute floor.
The failover plan a Denticon office needs
- A second internet connection on a different technology (a cellular router or a second carrier) with automatic failover at the firewall, sized for the per-computer bandwidth rule above, tested monthly.
- Backup.Denticon.com bookmarked on two front-desk computers, with the credentials of a user who can sign in there.
- Routing slips or the day's schedule printed or exported first thing in the morning, because the backup site holds last night's data only.
- A desktop shortcut to XVWeb Capture on every capture station, created in advance, because "an internet outage alone does not prevent the ability to capture through XVCapture" but the shortcut must exist before the outage.
- Knowledge of the Offline Capture limits: images that stored successfully "will be purged locally after 24 hours," and "Offline Capture will not launch if you have not returned online within 7 days."
- A paper or phone process for payments and signatures, since signature capture and in-app payments run through Denticon in the browser.
- The status page subscribed to by email for the practice manager, so a vendor-side incident is recognised as one instead of being chased as a local fault.
The first-hour steps for a dead line are the same for any cloud PMS and are in our guide to what to do when the office internet is down. If you want to compare how another browser PMS behaves on the same day, our page on Curve Dental from the IT side covers its outage and cache rules.
Who backs up what with Denticon, and how do you get your data out?
Planet DDS backs up the hosted database "throughout the day, nightly, and weekly" and replicates it to a disaster recovery site. That protects the vendor's copy. Your own copy is your responsibility: the agreement makes export "Customer's sole responsibility" before termination, imaging exports carry a fee, and the self-service data download covers treatments, appointments and history, not documents.
| What | Planet DDS's copy | Your copy | How you get it |
|---|---|---|---|
| Patient database (demographics, ledger, charting, schedule) | Backups "throughout the day, nightly, and weekly"; replication to a disaster recovery site; if data is lost the agreement's remedy is restoration "from the latest backup" | A scheduled "data download" | Help center: "Schedule your data download for the following day. Return the next day to retrieve your data download." It "pertains to the treatments, appointments, and patient history in Denticon"; two-factor authentication is required and "If your organization is not subscribed to Denticon Patient Communications, you will not be able to request 2FA" |
| Nightly business-continuity files | Generated by Planet DDS | BCP files pulled by your IT provider | Over SFTP from the vendor's server (the help center documents the move to sftp.planetdds.com), scripted nightly to a drive you control |
| Patient documents and notes stored in Denticon (PDF, JPEG) | Hosted | Not in the self-service download | "please contact Denticon Support" |
| X-rays and images in Apteryx XVWeb | Hosted in XVWeb's cloud storage | Exports from XVWeb or XVCapture | Help-center export guides; at termination the agreement allows "a processing fee of $995 per extract/download in connection with the export of Customer's XVWeb server patient and imaging data," and images Planet DDS converted for you are not exportable until the Initial Term ends |
| Images in a bridged third-party suite (DEXIS, Romexis, CS Imaging) | Not Planet DDS's | The suite's own database on your server or NAS | Your backup, as before Denticon |
| Documents outside Denticon (scans, letters, exports, email) | Not Planet DDS's | Your file share or Microsoft 365 | Your backup |
| Browser cache on each PC | Not Planet DDS's | Not needed, but it holds patient data between weekly clears | Disk encryption and screen locks on every workstation |
Agreement clauses from the Planet DDS Software-as-a-Service Agreement (last updated 1 September 2026) and help-center articles read on 6 November 2026.
Three clauses deserve a highlighter before the renewal date. Section 17.2 says "It shall be Customer's sole responsibility to extract a copy of Customer Data from Planet DDS' data repositories prior to termination of this Agreement," with access to a transfer site "until thirty (30) days after termination." Export work beyond the basic copy ("multiple exports or converting, combining, or splitting Customer Data") is billed "at Planet DDS's then-current rates." And leaving early for convenience takes "at least sixty (60) days' prior written notice" and leaves you owing "all recurring subscription fees for the applicable Services through the remainder of the then-current Term." The earlier agreement dated 07-01-24, still posted on the vendor's site, set that exit charge at "fifty percent (50%) of the anticipated fees"; check which version your order incorporates.
The practical answer is a standing export habit rather than a scramble at the end: a monthly scheduled data download kept with your other dental data backup sets, nightly BCP files pulled by script, and a periodic image export test. The forum owner's external drive that "hadn't backed up for months" is the pattern to design against: whatever stays local, including bridged imaging databases, needs the same verified backup it needed before the move. For how a different cloud vendor handles the same question, see Open Dental Cloud from the IT side.
How does Denticon control sign-ins, sessions and remote access?
Denticon requires named user accounts, one active session per user, sessions capped at two hours, and lets administrators restrict each user to approved IP addresses and set password expiry between 15 and 365 days. Vendor technicians reach your computers only through consent-based LogMeIn sessions. These controls exist in the product; whether they are switched on is an office decision.
The agreement's Exhibit A is the clearest statement of the sign-in model: "'Dummy', generic and/or shared Licensed User IDs and passwords are prohibited"; each ID "shall be assigned to a single, unique and individually named human person"; and "A Licensed User is expected to access the Services via a single Session. Inactive sessions (including where a Licensed User maintains Sessions on multiple devices simultaneously) may be auto-terminated as an added security precaution." A shared "FrontDesk" login breaks the contract as well as the audit trail.
The help center adds the mechanics:
- Permitted IPs: under Setup, Security, Users, an administrator opens the "Permitted IPs" tab, clicks "Copy my current IP" for the office, and adds home ranges by hand. This only works if the office has a static public IP address; a dynamic address will lock the team out after the next change, which is the problem the vendor's static-IP article for Cloud 9 describes.
- Password expiry: "Denticon users are required to update their passwords every 365 days" by default, settable to "15/30/60/90/120/150/180/365 days" under Account Info.
- Audit trail: the security page says "Administrators can designate when and where users can log in and monitor all user activity via a detailed audit trail."
- Support access: a ticket's "Denticon Secondary Support" field "provides permission for Denticon support technicians to access your account," and for computer access the vendor's remote-access FAQ says "You must approve each session before it begins" and "Audit logs track who connected, when the session occurred."
- Apteryx XVWeb sign-in can use Active Directory Federation Services, which "should be done during the site setup process by the organization's IT and not after the site is created."
An office manager usually owns the user list; an IT provider owns the static IP, the Chrome policy, the password-manager rollout and the workstation locks that make these settings mean something. For the related problem of staff sharing clearinghouse and insurance portals, see payer-portal logins and MFA for dental groups, and for the vault itself, password management for a dental office.
What does moving to Denticon involve, and what does the conversion leave to your team?
Planet DDS quotes an average of 60 days for a solo practice and 8 weeks per location for a group, from kickoff to go-live. Its standard conversion follows a per-system checklist: demographics, insurance, appointments, ledger history, clinical notes, treatment plans and perio charts. Insurance plans, fee schedules, employers, procedure codes, providers and users are rebuilt by hand.
The implementation page lists the sequence: "kickoff call > set up Denticon account > staff training > audit trial conversion (if applicable) > final conversion (if applicable) > go live > post live check in," with training that includes "on-site support for launch day." The conversions page lists 25 source systems Planet DDS converts from, including Dentrix G4 through G7, Dentrix Enterprise and Ascend, Eaglesoft, Open Dental, Curve Hero, CareStack, Easy Dental, Fuse, Dolphin, Ortho2, Tab32, WinOMS and SoftDent (with SoftDent Cloud "In Review"); MOGO and PBS Endo are "Not Programmed." The vendor's own proof of scale is a newsroom headline: Park Dental Partners "Converts 80+ Locations to Denticon Practice Management Solution in a Single Weekend."
What the standard conversion includes, and what it does not
The current Professional Services Scope of Work (last updated 1 September 2026) describes one trial conversion per location, with Planet DDS mapping tools for your team to "review, confirm, and complete any unmapped fields," audits by both sides, and a final extraction "shortly before each location's go-live date." Scanned-document conversions "occur post go-live and may take several weeks to complete." Fields outside the checklist are custom work with a separate estimate, implementation hours are "billed monthly based on actual hours incurred," and the implementation team stays engaged "for 30 days after each location's go-live." The fees now sit in your order rather than on a public schedule.
The earlier agreement (07-01-24), still posted, did publish them, and it is a useful reference when you read your own order. Its Exhibit C set the standard scope at "10 years of historical data" for transactions, two years of treatment plans and "Future appointments plus 30 days prior to go-live"; perio charting, pre-existing conditions and subscriber information were non-standard items at $350 each; extra trial conversions cost "$750 per location"; and custom conversion work ran from $350 to $14,000 by size. Perio charts and pre-existing services now appear in the standard list.
The field-by-field map for Dentrix G5, G6 and G7 (a June 2025 PDF on the conversions page) shows what "standard" means in practice. The extraction itself is on you: "Client will need to contact Dentrix Support and request a data dump in CSV format. The requesting of data can take 1-2 weeks."
| Dentrix G5–G7 data | Converts? | Note from the mapping document |
|---|---|---|
| Demographics, phones, email, referrals, recalls, preferred dentist and hygienist | Yes | Patient status "Non patients convert as Inactive" |
| Patient type | No | "All patients will convert to one patient type in Denticon" |
| Ledger history, procedure codes, payments, adjustments, tooth and surface | Yes | Includes payment notes |
| Treatment plans | Yes | Plan and phase numbers set to 1 |
| Primary and secondary insurance, subscriber details, group number | Yes | Carrier name, phone, state and employer arrive as a note |
| Insurance plan breakdown, deductible remaining, maximum remaining, fee schedules | No | Deductible remaining set to $50 and maximum remaining to $1,500; fee schedules "Can be imported by office staff using Excel template" |
| Appointments (future plus 30 days prior) | Yes | Appointment types collapse to one; "Double Booked Appointments in a Single Column" overlap; new-patient appointments with no patient record are lost |
| Perio exams | Partly | Bleeding, pocket depth, mobility, furcation and recession convert; provider, exam note, plaque, calculus and bone loss do not |
| Scanned documents | After go-live | "Completed after Go Live" |
| Insurance plans, employers, fee schedules, proprietary procedure codes, practice and provider information, users, medical history form | No | "Manual System Configuration – Not able to Convert" |
Planet DDS, Standard Data Conversion Mapping, System Source: Dentrix G5/G6/G7, read 6 November 2026. The document notes that fields vary by version and that the vendor confirms what converts only after seeing trial data.
What your IT provider does during a Denticon conversion
The vendor runs the data; your team runs everything the data sits on. The scope of work says so directly: the customer is responsible for "Initiating the data request from their legacy system provider, for all databases, promptly upon contract execution," and for "workstation readiness" at each location before training and go-live, while "maintaining active access to the legacy system through final data extraction." In order:
- Freeze and image the old server before the final extract, and keep it readable (powered, backed up, licensed) for as long as your records-retention policy requires, because insurance breakdowns, appointment types and scanned documents do not all cross.
- Replace or upgrade every workstation that is on Windows 10 or older, and set the Chrome or Edge policy, pop-up and extension rules before training starts, so training happens on the real configuration.
- Measure upload speed during a hygiene column and add the second line before go-live, not after the first outage.
- Decide the imaging path per operatory (XVWeb capture, a bridged suite, or both) and install the extension, XVWebBridge or Bridge Service on every capture and viewing machine, then test one real sensor exposure per room.
- Stand up the export habit on day one: the data-download user with two-factor authentication, the SFTP job for BCP files, and the first image-export test.
- Rebuild the manual configuration with the office manager: insurance plans and fee schedules (the Excel template), employers, providers, users with named accounts and permitted IPs.
- Plan the scanned-document load for after go-live and the parallel-access window for the old system.
Our dental software migration checklist and PMS migration cutover plan cover the generic steps; a group buying a Denticon office should also read IT due diligence for a practice acquisition. If you are leaving a Carestream product, SoftDent offices planning a move have their own page.
What does Denticon cost, and which IT costs actually change?
Planet DDS publishes no subscription price for Denticon. Its pricing page shows three plans by location count with "Talk to Sales" on each, a discounted 12-month "Launchpad" plan for new groups, and paid add-ons. What it does publish are the terms that shape the real bill: one-year renewals, price changes on notice, exit costs, an image-export fee and text-message fees.
The owner who opened this guide gave his own figures on the forum: "Less than a year ago I was paying roughly $290 per office for a baseline Denticon PMS service for each of our 2 offices. Now I'm paying over $565," plus a clearinghouse bill and a planned increase. Those are one practice's numbers from March 2026, not a price list, and they are the reason the renewal clause matters more than any headline figure. Under the current agreement each renewal runs a full year, so the 30-day notice window before each anniversary is the date to put in the calendar.
What the vendor publishes
Planet DDS rewrote its terms on 1 September 2026 and still posts the earlier July 2024 agreement. Offices that signed before September may be on the older terms, so both are set out here.
| Item | Current terms (last updated 1 September 2026) | Earlier agreement (07-01-24), still posted |
|---|---|---|
| Subscription | No price on planetdds.com; plans "Essentials" (1–2 locations), "Pro" (3–19), "Enterprise" (20+); Launchpad "12-month plan with special pricing" | Not in the agreement; set in the order |
| Imaging storage | Essentials includes "Apteryx XVWeb Pro Limited"; Pro and Enterprise include "Apteryx XVWeb Pro Unlimited" (pricing page) | Not in the agreement |
| Term and renewal | Initial Term to "the first anniversary of the initial Billing Start Date," then "successive one (1) year terms" unless either side gives 30 days' notice | Same Initial Term, then "successive one (1) month terms" |
| Price changes | Planet DDS "may, upon written notice to Customer, make reasonable adjustments to the pricing of the Services effective for the upcoming Renewal Term(s)" | The same clause |
| Leaving early | Termination for convenience on "at least sixty (60) days' prior written notice"; you still owe "all recurring subscription fees for the applicable Services through the remainder of the then-current Term" plus services already delivered | Early Termination Fee "equal to fifty percent (50%) of the anticipated fees for such Services through the remainder of the Term" |
| Uptime | Denticon Service Level Addendum: at least 99.5 percent "Service Uptime, as calculated over a calendar month," with credits of 10% or 20% of that month's fees for the affected service, claimed in writing within 30 days | "Commercially reasonable efforts" only |
| Conversion | Scope in the Professional Services Scope of Work; fields outside the checklist estimated separately; fees in your order | Perio charting, pre-existing conditions, subscriber information $350 each; extra trial or post-go-live change "$750 per location"; custom work $350 to $14,000 |
| Implementation and training | Implementation hours "billed monthly based on actual hours incurred"; extra training at the rates in your order | Extra setup or training "$175 per hour"; virtual go-live support $175 per hour, four-hour minimum; onsite "$1,500 per eight-hour day, plus travel and related expenses," two-day minimum, six weeks' notice |
| Image data export at termination | "$995 per extract/download" for XVWeb patient and imaging data; other export work at "then-current rates" | "$995 per extract/download"; "a reasonable fee" for exports from other services |
| Text messages | Variable Fee Schedule (last updated 20 March 2024): carrier fee of $.0087 per segment above the package (6,000 segments per office for Denticon Patient Communication); "Monthly text messaging compliance fee (Per Account) $20.00" | The same schedule |
| Hardware, software and internet | The customer's responsibility under section 12 | The same |
Planet DDS pricing page, Software-as-a-Service Agreement (last updated 1 September 2026), Denticon Service Level Addendum and Professional Services Scope of Work (both last updated 1 September 2026), the earlier Software-as-a-Service Agreement (07-01-24) and the Variable Fee Schedule, all read on 6 November 2026. Ask which version your order incorporates before you rely on any row.
Which IT costs go away, and which stay
Denticon removes the practice server for the database: no server hardware refresh, no server operating system or client access licences, no nightly database backup job for the PMS itself. The vendor's security page lists the server, its software and disaster-recovery backups among the costs Denticon removes. What stays is longer than the demo suggests: workstations on a current Windows, Chrome management, the network and a second line sized to the per-computer rule, imaging computers with drivers, bridges and any local imaging database, backups of everything outside Denticon plus your own exports of what is inside it, Microsoft 365 or whatever carries email and documents, and the support desk that answers "Denticon is slow" before the vendor will.
That last item has a contractual edge for groups. Exhibit B of the agreement says enterprise customers "shall provide a person(s) or team(s) of Level 1 Support personnel to act as its internal Help Desk(s)," that Level 2 support "will be provided during Planet DDS's normal business hours," and that Level 2 "will not directly support Customer's Licensed users." A single practice gets "unlimited Level 1 and 2 Support" through one named support contact, also in business hours. Either way, the evening and weekend call about a sensor or a frozen browser lands with your own IT. For the five-year comparison of server and cloud running costs, see what still needs a server with cloud dental software; for what a dental IT plan should carry once the server is gone, see managed IT services for dental practices.
Does Denticon fit a group, and what should the group's IT standardise?
Denticon is built and sold for groups: one database across locations, plans from 3 to 20-plus sites, analytics add-ons, and conversions of 80-plus locations in a weekend. The IT work is standardisation: a current Windows build, a managed browser policy, a static IP per location, the imaging path per operatory, and a help desk that meets the Level 1 obligation.
The group-specific facts from the vendor's pages:
- Plans: Pro for "3–19 locations," Enterprise for "20+ locations" with "Custom onboarding and support when you work with our team to tailor training, data migration, and implementation to your org's needs."
- Reporting: the enterprise page says Denticon "is equipped with over 100+ reports." Large reports can fail with "File size is too large to download," and the vendor's advice is to narrow the date range or run per-office reports.
- Analytics dependencies: two October 2025 incidents on the status page name Microsoft Azure, one of them behind Denticon Practice Analytics, and the Enterprise "Data Share" feature had an Azure processing delay in May 2026 and an "Incomplete Data Share" incident in June 2026. Treat the analytics layer as a separate dependency from the PMS when you plan downtime.
- Support model: your Level 1 help desk, then Level 2 from Planet DDS in business hours, as above.
- Sign-in: Permitted IPs per user and the single-session rule apply across every site, so each location needs a static public IP and a documented home-access list for the people who legitimately work remotely.
- Third-party tools: the help center directs offices to the vendor's list of enabled API vendors, "updated on a quarterly basis," and Planet DDS has announced that it is "limiting Denticon and Cloud 9 access to unauthorized payments vendors" in favour of its own Planet DDS Pay. A group's integration list needs an owner who checks it each quarter.
A DSO's IT lead usually turns this into a per-location checklist: the Windows image, the Chrome policy that allows local network access for the Denticon domain, the firewall with failover and a static address, the per-operatory imaging decision, the bridge installer, the export jobs, and the named-user audit. Our DSO IT support services guide sets out that structure, and the DSO IT support page covers how a provider staffs it across sites.
The IT side: what your IT provider owns with Denticon
| Area | Planet DDS owns | Your IT provider owns |
|---|---|---|
| Application and database | Hosting, updates in scheduled windows, backups and replication | Nothing on the server side; everything that reaches it |
| Workstations | Publishes the requirements | A current Windows on every PC, Adobe Reader, Chrome or Edge current, pop-ups allowed, extensions controlled, weekly cache routine, disk encryption and screen locks |
| Browser policy | Documents the Chrome 142 local-network prompt and the fleet fix | Chrome Enterprise policy for the Denticon domain, bookmark hygiene, two-window rule in staff training |
| Internet and network | Publishes the per-computer bandwidth rule | Wired operatories, a business-grade firewall, a static public IP, a second line with tested failover, Wi-Fi kept off the capture path |
| Imaging | XVWeb, the extension and bridge installers, the Bridge Service and its compatibility list | Sensor drivers and calibration files from the maker, bridge installs on every capture and viewing PC, suite version control (the Sidexis exception), 3D software and storage, offline-capture shortcuts |
| Outages | The status page, Backup.Denticon.com, offline capture | The failover plan, the morning routing-slip habit, the paper fallback, status-page subscriptions |
| Backups and exports | The vendor's copy and restore from "the latest backup" | Scheduled data downloads, nightly BCP pulls over SFTP, image-export tests, backups of bridged imaging databases, documents and email |
| Identity | Named-user rule, Permitted IPs, password expiry settings, audit trail, consent-based remote support | User lifecycle with the office manager, the password manager, the static IP that makes Permitted IPs work, approving and logging vendor remote sessions |
| Peripherals | Driver downloads under Help and Downloads | Scanners, signature pads, label printers and card terminals on Windows, re-tested after each Chrome update |
| Conversion | Trial and final conversions, training, launch-day support | The old-server freeze and retention, workstation readiness, imaging path per room, export jobs from day one, manual configuration with the office manager |
| Support | Level 2 in business hours; Level 1 for single practices through one contact | The first call for "Denticon is slow," and the Level 1 help desk a group is contractually required to provide |
Twelve things to confirm in writing before signing with Denticon
- Which plan you are being sold, what "With policy min." means for your location count, and the exact list of included modules (XVWeb Pro Limited or Unlimited, patient communication, analytics, eClaims).
- Which agreement version your order incorporates (the 1 September 2026 terms or the earlier 07-01-24 agreement), and the conversion checklist and field map PDF for your source system.
- The renewal mechanics in writing: the Initial Term end date, whether renewals run a year (current terms) or a month (07-01-24), the 30-day notice window, and how price adjustments are notified.
- The export path at termination, the 30-day access period, the $995 XVWeb export fee and the rates for any other export work, plus confirmation that any images the vendor converts for you can be exported after the Initial Term.
- What leaving early would cost under your version: the rest of the term's subscription fees with 60 days' notice (current terms) or 50 percent of anticipated fees (07-01-24).
- Whether every workstation meets the help-center device environment (a current Windows, current Chrome or Edge), not just the public Windows 10 table.
- The per-computer bandwidth rule against your measured upload speed, and the XVWeb minimum of 20 Mbps down and 10 Mbps up if you adopt cloud imaging.
- The imaging path for each operatory, the Bridge compatibility list for your suite and version (Sidexis 4.3 and 4.4 are listed as not compatible), and whether your 3D software is on the October 2026 third-party bridge list.
- The support model that applies to you: a single support contact in business hours, or, for a group, your own Level 1 help desk before Level 2.
- Whether the data-download feature's two-factor authentication is available on your plan, since it depends on a Patient Communications subscription.
- Which third-party vendors you rely on are on the vendor's enabled API list, and whether your payment processor is affected by the vendor's payments policy.
- The Denticon Service Level Addendum that applies to you (the monthly uptime commitment, the 15-minute and internet-line exclusions, the 30-day credit claim), plus the maintenance cadence and status page address so the practice manager can subscribe before go-live.
What to ask your IT provider about Denticon
Before the contract
- Which of our workstations are on Windows 10 or older, and what is the replacement plan before training starts?
- What is our measured upload speed during a hygiene column, and what second line will carry Denticon and XVWeb when the primary fails?
- Do we have a static public IP at every location, and who maintains the permitted-IP list and the home-access exceptions?
- Which operatories will capture through XVWeb and which through a bridged suite, and is our imaging suite version on the compatibility list today?
During the conversion
- Who freezes and images the old server before the final extract, and how long will it stay readable?
- Who installs the extension, XVWebBridge or Bridge Service on every capture and viewing machine, and who tests one exposure per room?
- Who sets the Chrome policy for pop-ups, extensions and local network access, and will training run on that configuration?
- Who owns the manual configuration list (insurance plans, fee schedules, employers, providers, users) alongside the office manager?
After go-live
- When does the scheduled data download run, where do the nightly BCP files land, and when was the last image-export test?
- What is our outage order of operations: failover line, backup site, offline capture, paper?
- How are Chrome and Windows updates scheduled so a capture PC is never updated mid-column, and who re-tests scanners and signature pads afterwards?
- Who reviews vendor remote-access sessions and the enabled API vendor list each quarter?
How Legend Networking can help
Legend Networking is a Dallas-based dental IT company that has served over 3,500 practices since 2004, with 22+ years in dental IT and 24/7 monitoring. Legend supports the IT environment for the practice software Dentrix, Eaglesoft, Open Dental and Archy, and for the imaging systems DEXIS, Vatech, Carestream, Planmeca/Romexis and Dolphin Imaging, several of which appear on Denticon's bridge list. Onsite dispatch is by appointment across served dental markets; support is remote-first nationwide, with dental IT support in your city listed by location, and managed plans starting at $360 per month.
The author, Ian Lynch, has 22 years in dental IT and oversees the NOC, onsite dispatch and client technology roadmaps. Legend holds a 4.8 rating from 173 Google reviews. For the kind of groundwork a browser-based office still needs after the server is gone, see a recent managed IT onboarding covering network and server review, security, backups, software and user access, and the dental practice management software support page for the platform work itself.
Frequently asked questions
Is Denticon cloud-based, and does it still need a server?
Denticon runs in a browser against a database Planet DDS hosts, so the practice management system needs no server. A server or NAS may still be needed for a bridged third-party imaging suite, 3D volumes, documents and file shares outside Denticon, and any legacy system kept readable after conversion. Workstations, network and backups of those local stores remain the office's responsibility.
What are the Denticon system requirements for office computers?
The public page lists Windows 10, an Intel i3 or better, 4 GB of RAM, 80 GB of disk, a 1200 x 800 display, Chrome or Edge, current Adobe Reader and 3 Mbps down with 1 Mbps up. The help center's device-environment article (August 2026) asks for a current Windows and current browser, a weekly cache clear and no interfering extensions, which is the standard to plan to.
Does Denticon work on a Mac or an iPad?
Planet DDS's help center says Denticon "is not programmed to operate on MacOS or iOS computer" and supports it only in a PC environment on Chrome or Edge. A Mac needs Boot Camp or Parallels running Windows, and scanner, signature-pad and x-ray software is Windows-only. iPads are not a supported way to run the full program, so plan Windows PCs in every operatory and at the desk.
Is there a Denticon app for phones or tablets?
As of 6 November 2026 the Apple App Store and Google Play searches return no Denticon app published by Planet DDS, and the vendor's own help center says the program runs only on Windows PCs in Chrome or Edge. Planet DDS markets patient-facing tools (online scheduling and digital forms under its Patient+ line) that patients use from any device; staff access remains the browser on a Windows computer.
What internet speed does Denticon need?
Planet DDS's help center sets 1 Mbps down and 512 kbps up per computer running Denticon, so ten computers need 10 Mbps down and 5 Mbps up at minimum. Apteryx XVWeb imaging adds its own 20 Mbps down and 10 Mbps up minimum. Measure upload during a busy column and size the line and a failover connection to that.
What happens in a Denticon office when the internet goes down?
Scheduling, charting and billing stop until the line returns. Backup.Denticon.com lets staff print the schedule and routing slips synced as of the previous night, XVWeb Capture can keep taking x-rays offline for up to seven days with a shortcut created in advance, and the vendor notes some offices keep a cellular connection as a fallback. A tested second line and a paper process close the gap.
How often is Denticon down, and where can I check?
Planet DDS publishes incident history on its status page. Pulled on 6 November 2026, it showed 16 incidents in the previous 90 days, 12 of them Denticon-related, from short sign-in failures to a clearinghouse outage, plus one-hour "New Denticon Version" windows about every two weeks. The service level addendum sets a monthly uptime commitment with fee credits. Subscribe to the status page for alerts.
Which x-ray sensors and imaging software work with Denticon?
Imaging reaches Denticon through Apteryx XVWeb (a browser extension plus a local bridge and capture software on Windows) or through the Denticon Bridge Service, which launches suites such as DEXIS, Planmeca Romexis, Schick, XDR, Dolphin and Patterson Imaging. The compatibility list notes Sidexis 4.3 and 4.4 as not compatible. Sensor drivers always come from the sensor manufacturer, not Planet DDS.
Can I get my data out of Denticon if I leave?
Yes, but the agreement makes it your job: "It shall be Customer's sole responsibility to extract a copy of Customer Data" before termination, with access for 30 days after. The self-service data download covers treatments, appointments and history; documents need a support request; XVWeb image exports can carry a $995 processing fee per extract. Build a monthly export habit rather than exporting at the end.
How much does Denticon cost per month?
Planet DDS publishes no monthly price; its pricing page shows Essentials, Pro and Enterprise plans by location count with "Talk to Sales," a discounted 12-month Launchpad plan and paid add-ons. Implementation and training fees are set in your order. The published terms are a $995 image-export fee, text-message fees, one-year renewals with price changes on notice, and the rest of the term's fees if you leave early.
The bottom line
Moving to Denticon, or renewing it, is the moment to look at everything the agreement leaves with you: the Windows build on every computer, the browser policy, the line and its failover, the sensors and bridges, and the exports that make the data yours. Ask for a Free Dental IT Assessment, a review of your computers, software, network security, backups and performance with written findings and prioritized recommendations, alongside our dental software migration checklist and our dental practice management software support page.

