Skip to main content
Operations · OPERATIONS

Dental IT Consultant: What They Do, When to Hire One, What It Costs

An owner holding a quote for new computers and a server often suspects the hardware is marked up and wonders whether to do the work himself, while other owners say paying an IT company has been the best money they have spent. Both can be true. The difference is whether anyone independent looked at the practice before the quote was written.

This guide explains what a dental IT consultant does and does not do, how the role differs from a managed IT provider, a startup consultant and the equipment dealer, the six situations where a practice needs one, what the deliverables should look like, how consulting is priced in the market, and how to vet a consultant before you sign. It is written for a practice owner with one to three locations who has a technology decision ahead and wants to know who should make it.

In this guide
  1. What does a dental IT consultant actually do?
  2. Consultant, managed IT provider, startup consultant or dealer: who does what?
  3. When does a dental practice need an IT consultant?
  4. What should a dental IT assessment include?
  5. What does a dental technology roadmap look like?
  6. How does a consultant run vendor selection and project oversight?
  7. How do dental IT consultants charge?
  8. The IT side: what should you hold when the consultant leaves?
  9. How do you vet a dental IT consultant?
  10. What to verify before you sign
  11. What to ask your IT provider about consulting work
  12. How Legend Networking works as a dental IT consultant
  13. Frequently asked questions
  14. The bottom line

What does a dental IT consultant actually do?

A dental IT consultant is paid for advice and oversight rather than for keeping systems running. The work is an assessment of what the practice has, a written plan for what it needs, help choosing vendors and products, and supervision of the project until handover. The consultant may also run the IT afterwards, as a separate service.

The word "consultant" covers a wide range in dentistry. A practice management consultant works on scheduling, collections and case acceptance. A startup consultant coordinates the business side of opening an office. A dental IT consultant works on the technology layer: computers, server or cloud, network, imaging integration, phones, security and backup, and the contracts behind them. The table below lists what a dental IT consultant produces and what each deliverable should contain.

DeliverableWhat you should receiveUsually triggered byWho else might offer a version
Technology assessmentAn inventory of every computer, server, switch, firewall, sensor PC and imaging device, with age, operating system and support status; a network diagram; a backup and restore-test record; a list of who holds administrator accessA purchase, a new owner, a bad year of outages, an insurance renewalYour managed IT provider (often as a free review); a cybersecurity firm (security only)
Technology roadmapA dated plan of replacements, upgrades and decisions for the next one to three years, with the reason for each date and a budget range per itemThe assessment; a lease renewal; a vendor's end-of-support dateA managed IT provider's quarterly review
Vendor and product selectionWritten requirements, a shortlist, quotes on the same scope, reference checks and a recommendation with the trade-offs statedA software migration, a server-versus-cloud decision, a phone system change, a new imaging unitThe dealer or software vendor (for their own products)
Project oversightA schedule tied to the contractor's or vendor's timeline, acceptance tests, a punch list and a handover packA build-out, a second location, a relocation, a migrationA startup consultant (business side only); the general contractor (construction only)
Security reviewA documented risk analysis of where patient data lives and how it is protected, with prioritized fixesA renewal form, a near-miss, a new location, a compliance programA compliance consultant; the managed IT provider; a cyber insurer's assessor
Acquisition diligenceA technology inventory and risk register for the practice you are buying, with the cost to bring it to your standardA purchase agreementThe seller's IT company (conflicted); your own managed IT provider

Two things are deliberately missing from that table. A dental IT consultant does not install cabinets, negotiate chairs or write the marketing plan; that is the startup consultant, and our guide to dental startup consultants explains where the two roles meet. And a consultant does not answer the helpdesk phone on a Tuesday when a sensor stops capturing; that is support, which the next section separates from consulting.

Consultant, managed IT provider, startup consultant or dealer: who does what?

A consultant advises and oversees; a managed IT provider operates and supports; a startup consultant coordinates the business side of an opening; a dealer sells and installs equipment. Most practices need two of the four at once, and the common mistake is to let the party that sells the hardware also write the plan that specifies it.

RolePaid forDeliversDoes not usually doFits best when
Dental IT consultantAdvice, planning, oversight (hourly, project or retainer)Assessment, roadmap, vendor selection, project management, security reviewDaily support, monitoring, patchingA decision or a project is ahead and you want it specified before it is quoted
Managed IT provider (MSP)A monthly fee for running the technologyMonitoring, patching, helpdesk, backup management, security tools, onsite visits; often a yearly planning reviewIndependent product comparison when it also resells the productYou want one accountable team for uptime and support, with planning included
Dental startup consultantA project fee or retainer for the openingSite, financing, design review, equipment bids, hiring, launch marketingThe network, computers, software setup, phones or securityA first practice, where the sequence matters more than any single vendor
Equipment dealer or software vendorMargin on what it sellsInstallation and configuration of its own product; training on itAnything outside its product line; the office networkYou have chosen the product and need it installed to the maker's specification

The managed IT provider column is where most of the overlap sits. A good provider plans as part of the service, so a steady single-location office rarely needs a separate consultant for an ordinary workstation refresh. Our guide to what an MSP is and does for a dental office covers that side, and if you are weighing a monthly arrangement, managed IT services for dental practices describes the scope of one. Where a separate consulting engagement earns its fee is the project the monthly plan was never priced for: a second office, a purchase, a change of practice software, or an inherited environment nobody documented.

Be careful with the word "free". The dealer's free technology design, the software vendor's free hardware recommendation and the IT company's free assessment are all paid for somewhere. That does not make them useless; it means you should know whose margin depends on the answer before you accept it as the plan. A consultant who sells nothing has a different conflict: the fee grows with the hours, so insist on a fixed scope.

When does a dental practice need an IT consultant?

A practice needs an IT consultant when a technology decision is larger than the monthly support plan was priced for: a build-out, a second or de novo location, an acquisition, a practice software migration, a server replacement or cloud move, or a security review. In each case the consultant specifies and oversees before vendors quote and install.

SituationWhat the consultant producesWhen to startRead next
New build-outRoom-by-room technology plan, cabling specification for the contractor, vendor system requirements, build schedule, acceptance testsAt the drawings stage, before the permit setDental office design technology plan
Second or de novo locationA standard copied from the first office, a network that connects the two, a software and imaging plan for shared records, an opening timelineWhen the lease is under negotiationDental startup IT
Buying a practiceInventory, risk register and remediation cost for the seller's technology; a day-one access plan; a 90-day integration roadmapBefore the letter of intent is final; always before closingDental practice acquisition IT due diligence checklist
Changing practice softwareRequirements, a comparison on the same criteria, a data and imaging migration plan, a cutover weekend plan, workstation checks against the new system's published requirementsThree to six months before the planned cutoverDental software migration checklist
Server replacement or cloud moveA five-year comparison of replacing the server against hosted or cloud options, including imaging and internet redundancyTwelve months before the server's warranty or operating system support endsServer replacement vs cloud migration
Security reviewA documented risk analysis, a prioritized fix list, evidence for the insurer or a compliance programAfter a near-miss, at renewal, or when a new location or vendor is addedCybersecurity guide for dental practices
RelocationA move plan for the server, network, phones and imaging; downtime window; cabling at the new siteAs soon as the new lease is signedDental office relocation IT checklist
Group standardizationA standards matrix across locations, a co-managed split of duties, a reconciliation of what each office paysWhen the group passes three or four locations, or at an EBITDA reviewDSO IT support

Two of those rows are the ones owners most often skip. On a purchase, buyers inherit the seller's server, the seller's software accounts and sometimes the seller's IT company, and new owners still asking whether to keep the seller's server or move to the cloud are the symptom of a decision made after closing that should have been made before. Once the deal closes, the 90-day IT integration plan for an acquired dental office takes over from the diligence. On a second location, the cheapest path is to copy the first office exactly, and the only way to copy it is to have it documented first.

When do you not need one? If you have a dental-focused managed IT provider, a single location, a documented environment and no project ahead, the provider's yearly planning review is the consulting you need, and paying separately for it buys little. If the provider cannot produce the documents in the section on what you should hold, that itself is the finding.

What should a dental IT assessment include?

A dental IT assessment should inventory every device and account, map the network, check backups by restoring something, review who has administrator access, read the vendor contracts, and document the risks to patient data in writing. The output is a report the practice owns, written so the owner can act on it without the consultant in the room.

The assessment is where a consultant earns trust or loses it. A report that says "upgrade recommended" with a quote attached is a sales call. A report that lists what was found, what it means and what to do first, with the quote as a separate document, is consulting. Ask for these items by name:

    1. Device inventory. Every workstation, server, laptop, sensor PC, imaging computer, printer, switch, firewall, access point and camera, with purchase date, operating system version, and whether the maker still supports it.
    1. Software and account inventory. Practice management system and version, imaging software and bridges, clearinghouse, phone platform, email and Microsoft 365 or Google Workspace tenant, remote-access tools, and who owns each account.
    1. Network diagram. How the internet, firewall, switches, Wi-Fi and any second office connect, which networks the patient Wi-Fi and the operatory devices sit on, and where the server lives.
    1. Backup and restore evidence. Not a screenshot of a backup job: a record of a test restore of the practice management database and the imaging folder, with the date and how long it took.
    1. Access review. Who holds administrator credentials for the server, the firewall, the domain, the email tenant and each vendor portal, and whether former staff or former IT companies still have any.
    1. Imaging and vendor dependencies. Which sensors, cameras and scanners connect to which computers, what driver or bridge each relies on, and what the imaging vendor's current requirements say.
    1. Security controls. Multi-factor sign-in on email, remote access and vendor portals; disk encryption on laptops; endpoint protection; patching status; how remote access into the office is granted.
    1. Risk analysis. Where electronic patient data lives (server, imaging archive, cloud systems, email, laptops, phones, clearinghouse), the threats to it, and the current protection, written as a document.
    1. Contracts and exit terms. The IT support agreement, software subscriptions, the clearinghouse, the phone contract and the internet service, with renewal dates, notice periods and what happens to data if you leave.
    1. Findings ranked. What to fix this month, this quarter and this year, each with the reason and the rough cost band, separate from any quote.

Item eight is the one the HIPAA Security Rule names directly. The rule, at 45 CFR 164.308(a)(1)(ii)(A), requires a covered entity to "Conduct an accurate and thorough assessment of the potential risks and vulnerabilities to the confidentiality, integrity, and availability of electronic protected health information held by the covered entity or business associate." The same section, at (a)(8), requires "a periodic technical and nontechnical evaluation" of how well the practice's safeguards meet the rule. A consultant's assessment can produce those documents; what the practice does with them, and whether they satisfy the rule, is a question for the practice and its compliance adviser, not a line in an IT report.

What does a dental technology roadmap look like?

A dental technology roadmap is a dated list of what the practice will replace, add or decide over the next one to three years, with the trigger for each date and a budget range. The triggers are usually vendor support dates, warranty ends, software requirements and growth plans, not opinions. A roadmap without dates and reasons is a wish list.

The roadmap sits on top of a standard: what every office should have in its network, server or cloud, backup and security layers. Our guide to IT infrastructure for dental practices sets out that baseline component by component, so the roadmap can show where the practice falls short of it.

HorizonTypical itemsWhat sets the date
Next 12 monthsWorkstations past their warranty; any server or PC on an operating system the maker no longer updates; a firewall out of support; the backup method if a restore test failed; multi-factor sign-in on email and remote accessThe maker's lifecycle page; the warranty certificate; the assessment's findings
12 to 24 monthsServer replacement or a cloud decision; practice software version upgrade or migration; phone system contract renewal; imaging software version that drops support for an old operating systemThe server's age and the operating system's end-of-updates date; the software vendor's published requirements; the contract renewal date
24 to 36 monthsSecond location or expansion; sensor and camera refresh; cabling for new operatories; a change of practice software if the current one no longer fitsThe business plan; the lease; the vendor's product direction

The dates are public. Microsoft's Windows Server release information page lists Windows Server 2016 with "End of updates 2027-01-12", Windows Server 2019 at 2029-01-09 and Windows Server 2022 at 2031-10-14 (read 18 November 2026). Its Windows 10 lifecycle page states that "Windows 10 will reach end of support on October 14, 2025." A practice still running its Dentrix, Eaglesoft or Open Dental database on a 2016 server has a roadmap item with a date on it whether or not anyone wrote the roadmap. Our guide to Windows Server 2016 end of support for dental offices works through that case.

The practice software vendors publish their own requirements, and they move. Dentrix, Eaglesoft and Open Dental each publish minimum and recommended specifications for the server and workstations; imaging suites such as DEXIS, Carestream Dental and Planmeca Romexis do the same. A consultant reads the current version of each before specifying hardware, so the new computers meet the software you will be running in year three, not the version you are leaving. For practices weighing hosted or browser-based software, our cloud dental software guide sets out what changes for the office's IT when the server leaves, and what does not.

How does a consultant run vendor selection and project oversight?

A consultant runs vendor selection by writing the requirements first, then getting every quote on the same scope, checking independence and references, and recommending with the trade-offs stated. Project oversight means a schedule tied to the contractor's or vendor's dates, acceptance tests before payment, and a handover pack the practice keeps. The order matters more than the paperwork.

    1. Requirements before brochures. How many operatories and workstations, which practice management and imaging software and versions, how many locations will share records, what downtime the practice can tolerate, what the budget range is. Written down, one page.
    1. Shortlist on fit, not on who called back. Dental-specific experience with your software, references from practices of your size, and the ability to work with your contractor's schedule. Our guide to how to choose a dental IT company has the scorecard; our list of the best dental IT companies is a starting point for names.
    1. Quotes on the same scope. Every bidder prices the same requirements document. Separate one-time project cost from recurring support; our dental IT support cost guide explains the pricing structures and the worksheet that makes two quotes comparable.
    1. Independence check. Ask each bidder what it earns on the hardware, software and services it recommends, and whether it will install products it did not sell.
    1. References, asked properly. Call two practices of your size that went through the same kind of project in the last two years, and ask what went wrong and how it was handled.
    1. Contract review. Scope, exclusions, payment milestones tied to acceptance, what happens to the schedule if the contractor slips, who owns the documentation and the accounts.
    1. Acceptance tests. Written before the install: every sensor captures into the chart from every operatory, a test claim goes out, a test restore comes back, Wi-Fi covers every room, the phones ring where they should. Final payment follows the tests.
    1. Handover pack. Diagrams, credentials held by the practice, warranties, configuration notes and the open-items list, delivered before the project closes.

On a build-out, the consultant's calendar follows the contractor's. Low-voltage cabling goes in after framing and before drywall, so the specification has to exist before the electrician bids. Software configuration needs license details weeks before opening. The equipment install starts when the operatories are dust-free. A consultant who has run dental openings knows the order; a general IT consultant learns it on your project.

How do dental IT consultants charge?

Dental IT consultants charge by the hour, by the project, on a monthly retainer, or by bundling planning into a managed IT contract; some offer a free assessment as a sales step. None of the dental IT consulting pages read for this guide on 18 November 2026 publishes a rate, so fees come by proposal and the model shapes the advice.

Pricing modelHow it worksWhere it fitsWatch for
HourlyYou pay for time, usually in blocks; estimates are indicativeShort, well-defined questions: a second opinion on a quote, a contract read, a server-versus-cloud comparisonNo cap; the fee grows with the hours, so set a ceiling in writing
Fixed project feeA stated price for a stated scope and deliverables, often in milestonesBuild-outs, migrations, acquisitions: anything with a start, an end and a handoverScope creep on both sides; make the deliverables list part of the contract
Monthly retainerA fixed monthly fee for availability and a set of recurring deliverablesA growing group that has a decision every month and no in-house IT leadPaying for availability you do not use; review quarterly
Bundled into a managed planPlanning, roadmap meetings and project oversight are included in the monthly support feeA single office that wants one accountable providerIndependence: the plan is written by the party that sells and runs the result
Free assessment from a providerA review of the environment with written findings, offered at no chargeGetting a baseline and a second opinion before a decisionIt is a sales step; use it for the findings, not as the whole plan
Free design from a dealer or vendorHardware or layout recommendations tied to a product saleConfirming the product's own requirementsIt specifies what the dealer sells, not what the office needs

The mix is not unusual for consulting generally. Consulting Success, in its study of nearly 1,000 consultants (page read 18 November 2026), found that "30% charge project-based, 29% hourly, 16% on a monthly retainer, 15% value-based, and 10% daily." For a dental practice the practical rule is simpler: pay a fixed fee for a fixed scope when the project has an end, pay hourly for a question, and expect planning to be inside the monthly fee when you already have a managed IT provider. Published hourly and project figures for dental IT work sit in our cost guide, with their sources.

What a provider's free assessment should be is worth stating plainly, because the phrase covers everything from a sales visit to a real review. Legend's version is the Free Dental IT Assessment: a review of a practice's computers, software, network security, backups and performance, with written findings and prioritized recommendations. That is the baseline step. It is not a build-out plan or a migration project, and a practice with one of those ahead should expect to scope that work separately.

The IT side: what should you hold when the consultant leaves?

When a consulting engagement ends, the practice should hold the documents, not the consultant: the inventory, the network diagram, the credential register, the restore-test record, the risk analysis, the dated roadmap, the vendor and contract matrix, the acceptance-test results and a decision log. If the next provider has to rediscover any of it, you paid for it twice.

This is the part no sales page covers and the part that matters most when the consultant, the IT company or the office manager changes. Keep these in a folder the owner controls, with a copy outside the office:

    • Inventory and diagram from the assessment, updated at the end of the project to show what was actually installed.
    • Credential register. Administrator sign-ins for the server, firewall, domain, email tenant, remote-access tool and each vendor portal, held by the practice in a password manager the owner can open. The consultant and the IT provider have access through accounts the practice can revoke.
    • Backup and restore-test record. What is backed up, where, how often, and the date and result of the last test restore.
    • Risk analysis and evaluation record. The documented assessment of where patient data lives and how it is protected, plus the record of each later review.
    • Dated roadmap with the reason for each date, so the next planning conversation starts from it.
    • Vendor and contract matrix. Every vendor with access to patient data, the signed agreement with each, renewal and notice dates, and the exit terms.
    • Acceptance-test results and warranties for everything installed.
    • Decision log. Why the server was replaced rather than moved to the cloud, why one software was chosen, who decided, and on what evidence. A one-page log saves the next owner or the next consultant from re-opening a settled question.

The retention point is written into the Security Rule. At 45 CFR 164.316(b)(2)(i), the documentation standard says to "Retain the documentation required by paragraph (b)(1) of this section for 6 years from the date of its creation or the date when it last was in effect, whichever is later." Whatever your compliance adviser concludes about which of your documents fall under that paragraph, a practice that keeps its risk analysis, policies and review records for six years has made the question easy to answer.

How do you vet a dental IT consultant?

Vet a dental IT consultant on evidence, not the pitch: named dental software and imaging experience, references from practices like yours, a sample assessment report, a statement of what the consultant earns on its recommendations, a signed business associate agreement if the work touches patient data, and written deliverables with an end date. Score each row before the call ends.

CriterionEvidence to ask forRed flag
Dental depthWhich practice management systems (Dentrix, Eaglesoft, Open Dental, Curve, Denticon) and imaging suites (DEXIS, Carestream, Planmeca, Vatech) the consultant has specified and installed in the last two years, with practice names you can call"We support all software" with no examples; experience only with general offices
IndependenceA written statement of what the consultant earns on hardware, software, cabling and ongoing services it recommendsThe recommendation arrives as a quote; the consultant will not install products it did not sell
A sample reportA redacted assessment and roadmap from a recent engagementA slide deck with no inventory, no diagram and no dated plan
Project recordTwo openings or migrations of your size in the last two years, with the practice's contact and what slippedOnly "satisfied clients" quotes; no project that went wrong and was recovered
Patient data handlingWillingness to sign a business associate agreement before seeing your systems; its own security practices described in writingReluctance to sign; access requested through a shared login
Deliverables and exitA list of documents you will hold at the end, in the proposalDeliverables described as "ongoing guidance"; documentation kept by the consultant
Fit with your providersHow the consultant will work with your contractor, dealer, software vendor and current IT companyInsists on replacing every existing vendor before the assessment is done
Scope and feeA fixed scope with a fixed fee or a capped estimate, and a change processOpen-ended hourly work with no ceiling

A search for a dental IT consultant near you also returns map results of local IT companies; the scorecard applies to them in the same way, and the cities Legend serves page lists the dental markets Legend serves, with onsite dispatch by appointment across them and remote support nationwide.

The business associate point is not a formality. The Security Rule at 45 CFR 164.308(b)(1) allows a covered entity to let a business associate "create, receive, maintain, or transmit electronic protected health information on the covered entity's behalf only if the covered entity obtains satisfactory assurances" that the associate will safeguard it, and (b)(3) requires those assurances to be documented "through a written contract or other arrangement." If a consultant will log into your server, open your imaging archive or read your practice management database to assess it, ask before any access whether it will sign a business associate agreement, and ask your compliance adviser whether your engagement needs one.

What to verify before you sign

Proposals for consulting look alike. These checks separate them, and each is a question you can put in writing before you commit.

    1. The deliverables, named. The assessment report, roadmap, requirements document, vendor comparison, acceptance tests and handover pack appear in the contract as items, not as "advisory services".
    1. The scope boundary. What is excluded in writing: construction, equipment procurement, software licenses, cabling labor, ongoing support, and what happens to anything that is discovered mid-project.
    1. The fee basis. Hourly with a cap, fixed project fee with milestones, or retainer; and what triggers a change order.
    1. The independence statement. What the consultant earns from anything it recommends, including referral arrangements with dealers and software vendors.
    1. Who owns the documents and the accounts. Every diagram, report and credential is the practice's property, delivered in editable form.
    1. The business associate agreement, signed before any access to systems holding patient data.
    1. References you chose, not only the two the consultant offered.
    1. The end. A dated completion point, a handover meeting, and what support, if any, exists after it.

What to ask your IT provider about consulting work

Many practices will get their consulting from the company that already runs their IT. These questions tell you whether the planning is real or a line in the brochure.

About scope

  • Which parts of a build-out, acquisition or migration are inside our monthly plan, and which would you quote separately?
  • When you recommend a server, workstation or firewall, what do you earn on it, and will you install one we buy elsewhere?
  • Who on your side writes the requirements and the acceptance tests, and who runs the project day to day?

About independence

  • If the practice software vendor and the imaging vendor disagree about hardware, whose specification do you follow, and why?
  • Have you recommended staying on a server when a client wanted the cloud, or the reverse, and what decided it?
  • Can we see a redacted assessment report and roadmap you delivered to a practice our size?

About the handover

  • Which documents will we hold at the end, and in what format?
  • Who holds the administrator credentials for our server, firewall, domain and email, and how do we revoke your access if we leave?
  • How often do you review the roadmap with us, and who attends?

How Legend Networking works as a dental IT consultant

Legend Networking is a Dallas-based dental IT company that has served over 3,500 practices since 2004. Its dental IT consulting page sets out how that planning work is scoped, from single-office build-outs and practice refreshes to multi-location expansions. Day-to-day dental IT support is a separate, monthly arrangement, with in-house engineers and no outsourced first-level triage, 24/7 monitoring, and onsite dispatch by appointment across served dental markets, remote-first nationwide. Legend supports the IT environment for Dentrix, Eaglesoft, Open Dental and Archy, and for the DEXIS, Vatech, Carestream, Planmeca/Romexis and Dolphin Imaging systems.

The author, Ian Lynch, has 22 years in dental IT and oversees the NOC, onsite dispatch and client technology roadmaps. Legend holds a 4.8 rating from 173 Google reviews. For a sense of the second-location work this guide describes, see a second-location opening in Florida that covered the network, Wi-Fi, backup and disaster recovery, and dental software integration.

Questions

Frequently asked questions

What is a dental IT consultant?

A dental IT consultant is a specialist paid to assess a dental practice's technology, plan what it needs, help choose products and vendors, and oversee projects such as a build-out, an acquisition or a software migration. The role is advice and oversight; running the systems day to day is support, which may come from the same company or a different one.

What is the difference between a dental IT consultant and a managed IT provider?

A consultant advises and oversees for a project or a decision; a managed IT provider runs and supports the technology for a monthly fee. Many managed providers include planning in their service, so a steady single office may not need a separate consultant. The distinction matters when the party writing the plan also sells and installs what the plan specifies.

When should a dental practice hire an IT consultant?

Hire one at a decision point the monthly support plan was not priced for: a new build-out, a second or de novo location, buying a practice, changing practice management software, replacing a server or moving to cloud software, a security review, or a relocation. Start before vendors quote, so the requirements exist first and every quote prices the same scope.

How much does a dental IT consultant cost?

Dental IT consultants charge hourly, by fixed project fee, on a monthly retainer, or by including planning in a managed IT contract. The dental IT consulting pages read for this guide publish no rate, so fees come by proposal. Ask for a fixed fee or a capped estimate against a written list of deliverables, and compare proposals on those deliverables rather than on the headline number.

Does opening a new dental practice call for a separate IT consultant?

Not as a separate hire in every case, but somebody has to do the consultant's work: specify cabling before the electrician bids, read the software and imaging vendors' requirements, plan the network and phones, and run acceptance tests before opening. A dental startup consultant usually does not cover technology, so a dental IT provider that runs build-outs fills the role.

Should the consultant also sell me the hardware?

It is common and not wrong, but you should know it before you read the recommendation. Ask what the consultant earns on each item and whether it will install equipment you buy elsewhere. If the plan arrives as a quote with no separate findings report, you have received a sales proposal, not an assessment. Independent advice costs a fee; bundled advice costs margin.

Is a free IT assessment the same as consulting?

No. A provider's free assessment is a baseline review with written findings, offered as a sales step, and it is useful for exactly that. Consulting on a project adds requirements, vendor selection, a dated roadmap, project oversight and a handover pack, and it is scoped and priced separately. Use the free assessment for the findings, then decide what the project needs.

When should a consultant join a dental practice acquisition?

Before the letter of intent is final, and in every case before closing. The consultant inventories the seller's technology, records who owns the software accounts and the data, tests the backups, prices the gap to your standard, and plans day-one access and a 90-day integration. Decisions made after closing, such as keeping or replacing the server system, cost more and take longer.

Can a dental IT consultant help us move from a server to cloud software?

Yes, and it is one of the most common engagements. The consultant compares replacing the server against hosted and cloud options over several years, including imaging, internet redundancy and what stays in the office, checks workstations against the new software's published requirements, plans the data and imaging migration and the cutover weekend, and documents who is responsible for what afterwards.

Does a dental IT consultant need to know Dentrix, Eaglesoft or Open Dental?

Yes. Each practice management system and imaging suite publishes its own server and workstation requirements, bridges and update behaviour, and a consultant who has not specified for your software will learn on your project. Ask which systems the consultant has specified and installed in the last two years, and for a practice you can call that runs the same software as you.

The bottom line

If a build-out, a purchase, a software change or a server decision is ahead, ask for a conversation about dental IT consulting before anyone writes a quote: what the practice has, what the project needs, and which documents you will hold at the end. If the day-to-day side is the problem, start with dental IT support and bring the planning into the same conversation.

Ian Lynch
About the author

Ian Lynch

Owner & Operator, Legend Networking

22 years in dental IT. Oversees the NOC, onsite dispatch and client technology roadmaps for practices nationwide.

  • Operations center

    Dallas, Texas

    Serving dental practices nationwide since 2004

  • NOC hours

    24/7 monitoring

    Helpdesk staffed 24/7 at 1-800-794-1588

  • Engineers

    In-house only

    No outsourced first-level dental IT triage

  • Onsite dispatch

    By appointment

    Technicians deployed across served dental markets

About Legend Networking
Your next step

Ask for a consultation before your next technology decision

Tell us what you are running and we will review it with you.

Or call 1-800-794-1588

Free IT assessment

Tell us what you are running

Your information is secure and will never be shared.