Skip to main content
Regional · DENTAL IT · LAS VEGAS SOFTWARE AND IMAGING

Dental Software and Imaging Support in Las Vegas: Who Fixes Dentrix, Eaglesoft, Open Dental and Sensors

Two problems arrive before 9 a.m. At the Summerlin front desk, the schedule takes most of a minute to open each time someone clicks a new day. Across the valley in your Henderson operatory, the sensor lights up, the assistant hears the exposure, and the image never appears in the patient's chart. The software company says to call IT. IT says it looks like the imaging company. Patients are waiting.

When something stops, this is the page to open; the service itself is described under dental IT support in Las Vegas. The reader we have in mind is an office manager in Summerlin, Henderson, North Las Vegas, Spring Valley or Enterprise, or the owner-doctor in a small office who runs the front desk too. You will find how to separate the layers, which checks staff can safely make, the hours each vendor answers on a Las Vegas clock, and a log that makes the first call count. Heat, power and opening a new office are covered in the wider guide to dental IT in Las Vegas. Nothing here ranks one product above another.

In this guide
  1. Is the slowdown in the program, the network or the server?
  2. Who owns the fix? A layer-by-layer table
  3. When do vendor support lines close in Las Vegas time?
  4. What should a Henderson or Summerlin office check first when a sensor stops capturing?
  5. Why do imaging workstations misbehave after a power flicker?
  6. The office grew and the schedule got slower: what changed?
  7. Should a Las Vegas office run its practice software in the cloud or on a server?
  8. How should a Las Vegas group keep imaging working when offices run different versions?
  9. What should you write down before you call?
  10. Which systems does Legend list among those it supports?
  11. What should you check before an upgrade or migration?
  12. What to ask your IT provider about software and imaging
  13. Key takeaways
  14. Sources
  15. Frequently asked questions
  16. The bottom line

Is the slowdown in the program, the network or the server?

Ask four questions: one computer or all, one office or the whole group, after an update or not, and at the same time each day? One computer points to that workstation. Every computer points to the server, network or a shared update. Every office at once points to a shared database, a cloud service or the internet.

Those four questions take two minutes and narrow the search more than any restart. Work through them in order.

One PC or all of them? Open the same patient on the computer next to the slow one. If the second computer is quick, the fault is local to the first: its disk, its memory, a program starting in the background, or its network cable. If both are slow, look at what they share.

One office or every office? This question only exists for groups, and it matters. If your Summerlin and Henderson offices share one database, and both are slow, the problem is almost certainly at the database or the connection to it. If only Summerlin is slow, the cause is inside that office: its switch, its internet line or its local server.

After an update? Ask whether Windows, the practice software or the imaging program updated overnight. Many slowdowns and most "it worked yesterday" imaging faults follow an update that reached some computers and not others.

Same time every day? A schedule that crawls every day at 12:30 p.m. is often waiting on something that runs at 12:30: a backup, a virus scan, a large image upload or a report. Write the time down. It is the most useful clue an office can give.

For product-specific slowness, Legend has a separate guide to why Dentrix is slow that walks through the common causes in one practice-management program. The principle carries across products.

Who owns the fix? A layer-by-layer table

Each layer of a dental office's technology has a usual owner. The practice owns how staff use the system. The IT provider owns workstations, the network, the server, accounts and backups. The software and imaging vendors own their programs and devices. The internet carrier owns the line, and NV Energy owns the power. Name the layer, then call its owner.

The table below starts from what the office sees. It describes a typical setup, where a software vendor supplies the program and an IT provider runs the computers and network. Your contracts may divide things differently, so check them.

Table 1: Symptom, layer, first check and owner

What you seeMost likely layerTwo-minute checkUsual owner
The schedule opens slowly on one front-desk PC onlyThat workstationRestart it; open the same day on the next PC and compareIT provider
The schedule is slow on every PC in the officeServer, database or office switchNote the time; ask whether a backup or update runs thenIT provider
Every office in the group is slow at onceShared database host, cloud service or the link between officesCheck the vendor's status page if the program is hostedIT provider first; software vendor if its service is down
The sensor shows no light or the PC makes no connect soundSensor cable, USB port or driverMove the sensor to another USB port on the same PCIT provider for the port and driver; imaging vendor if the sensor is faulty
Exposure fires, yet no X-ray lands in the chartThe bridge between programs, or the wrong patient pickedShut the imaging window, pick the patient again in the chart, launch imaging from thereBridge configuration: IT provider. A fault inside the bridge: the software or imaging vendor
Old images open, but new ones will not saveImage storage path or a disconnected network driveLook in File Explorer for a drive with a red XIT provider
Imaging fails in every operatory at onceImaging server or service, or an update pushed to every PCAsk whether anything updated last nightIT provider, then imaging vendor
Hosted practice program hangs in all roomsOffice internet, firewall, or an outage at the vendorTry any public website from that PCLine down: carrier, with your IT provider. Vendor outage: the vendor
A single person is locked out after changing a passwordTheir account, a licence seat, or their Windows profileHave them sign in at a different deskWindows and email: IT provider. The program's user list: your practice admin
Everything stopped after the lights flickeredPower: server or switch did not come back cleanlyCheck the battery backup display and the switch lightsIT provider; NV Energy if power is still out

Two patterns cover most mornings. A lone failing room means the cause lives in that room. A whole office failing together means the cause is something all rooms use.

The table also explains the "call the other company" loop. The software vendor sees a PC that cannot reach the database and calls it a network problem, which it often is. The IT provider sees a working network and a program that will not save, and calls it a software problem, which it sometimes is. Somebody has to own the trace from the symptom to the layer. In most offices that is the IT provider, and the contract should say so. Where that boundary normally sits is the subject of Legend's piece on dental software support vs IT support.

For the practice, the goal is simple: report the symptom once, to one place, and get one answer back.

When do vendor support lines close in Las Vegas time?

Earlier than many offices expect. As published on 9 November 2026, three imaging lines kept Eastern hours and finished at 3, 4 or 5 p.m. Las Vegas time; Open Dental and Dolphin Imaging kept Pacific hours. Check the vendor's page for current hours. Nevada changes its clocks with Eastern and Central states, so the gaps hold all year, with one exception below.

Las Vegas runs on Pacific time and observes daylight saving time. NIST's daylight saving page lists the places that skip the change (Hawaii, Arizona outside the Navajo reservation, and the territories), and Nevada is not one of them. So a line that publishes Eastern hours is always three hours ahead of you, and a Central line is always two hours ahead. The one case that does shift is a vendor that labels its hours "MST": a Mountain Standard clock sits one hour ahead of Las Vegas in winter and level with it in summer, unless the vendor actually means Mountain time with daylight saving.

Every row shows hours as published on 9 November 2026; check the vendor's page before you rely on them. Nothing is added beyond the time-zone arithmetic. If a vendor's page refused us, the row is left without hours. Vendors revise their hours, so also confirm against the support terms in your own agreement.

Table 2: Vendor support hours on a Las Vegas clock, as published on 9 November 2026; check the vendor's page

Vendor and product typePublished hoursTime zone statedOn a Las Vegas clock
Open Dental, practice programMonday to Thursday 5 a.m. to 5:25 p.m., Friday 5 a.m. to 5 p.m., Saturday 7 a.m. to 3 p.m., Sunday 7 to 11 a.m.PacificNo conversion needed
Dentrix (Henry Schein One), practice programPhone or chat, Monday to Thursday 6 a.m. to 6 p.m., Friday to 5 p.m.Shown as "MST"November to mid-March: 5 a.m. to 5 p.m. (Friday to 4 p.m.). Mid-March to November: the same, if the line moves to Mountain daylight time; 6 a.m. to 6 p.m. if it truly holds MST. Ask Dentrix.
Eaglesoft (Patterson), practice programPatterson's support page refused our requestn/aUse the number in your Eaglesoft agreement or portal
Archy, practice programNone; its contact page says it is not a support channel and points users to the Help Center inside the appn/aRaise requests from inside Archy
DEXIS, imaging (US line)Weekdays 9 a.m. to 6 p.m.ETWeekdays 6 a.m. to 3 p.m.
Vatech America, imagingPhone or email, weekdays 8 a.m. to 8 p.m.ETWeekdays 5 a.m. to 5 p.m.
Carestream Dental, imaging systems line (intraoral and extraoral)8 a.m. to 7 p.m.; the page names no daysET5 a.m. to 4 p.m.
Planmeca / Romexis, imagingWe found no page with hours that would openn/aAsk your dealer, or read your service agreement
Dolphin Imaging, imagingPhone 5 a.m. to 6 p.m.; chat weekdays 5 a.m. to 4 p.m., closed weekends; the team trains each Friday 9 to 10:30 a.m.PacificNo conversion needed

What this means for a Las Vegas schedule:

    • Afternoon imaging faults are the risky ones. On the hours as published on 9 November 2026, a DEXIS problem that appears at 3:15 p.m. in a Henderson office is already past that line's hours, and a Carestream or Vatech problem has until 4:00 or 5:00 p.m.; check the vendor's page for the current times.
    • Mornings are on your side. As published on 9 November 2026, nearly every line in the table was answering by 6 a.m. Las Vegas time, before the first patient. If something felt wrong at closing yesterday, test it at 7:00 a.m. and call while lines are open and the chair is empty.
    • Book updates and vendor-assisted work early in the day, so if anything stalls, the vendor is still answering.
    • Keep a printed copy of this table, with your own account numbers, at each front desk. Date it, and recheck it twice a year.

Your IT provider's hours are a separate question. Legend's head office is in Dallas, which keeps a steady two-hour lead on Las Vegas. Calls go to one helpdesk number, 1-800-794-1588, staffed 24/7, with 24/7 monitoring running in the background. That does not replace the vendor when the fault is inside its product. It does mean the computers, network and server can be checked first, so the vendor hears a diagnosis instead of a guess.

What should a Henderson or Summerlin office check first when a sensor stops capturing?

Start with the physical connection and work up. Plug the sensor into another USB socket on that PC and wait for Windows to chime. If that fails, ask whether Windows updated overnight. Then check that the imaging program opens, that the practice software is launching the right patient into it, and that images are saving to the expected folder.

Sensors stop for a handful of reasons, and most can be narrowed down in five minutes without changing any settings.

Sensor checklist (stop when one fixes it, and note which)

    • [ ] Cable and socket. Pull the sensor's plug, count to ten, and use a different socket on the back of the PC. Skip any unpowered USB hub.
    • [ ] Another room. If the sensor works on a different operatory's computer, the sensor is fine and the first computer is the problem.
    • [ ] Imaging program running. Close and reopen the imaging program. If it will not open at all, the fault is in the program, its service or the PC, not the sensor.
    • [ ] Bridge and patient. Launch imaging from the open chart, so the program receives the correct patient, instead of starting it from the desktop.
    • [ ] Storage. Ask whether new images in other rooms are saving. If none are, the storage path or the imaging server is the likely cause.

Stop there. Reinstalling drivers, changing bridge settings or editing storage paths belongs to whoever runs your IT, because a wrong change in one room can affect every room. Legend's DEXIS IT support page describes the environment work on one widely used imaging system, and the troubleshooting guide for dental imaging integration goes deeper on bridges.

Why do imaging workstations misbehave after a power flicker?

A flicker or brownout can stop a computer, a server or a switch mid-task. Imaging services may not restart cleanly, a database may need checking, and a switch may come back before the server and leave workstations unable to find it. Battery backup on the server, network gear and imaging computers, plus a written restart order, prevents most of the trouble.

The dust storm of July 1, 2025 is a recent local example: gusts reached 60 mph at the airport and 70 mph or more near Henderson, and NV Energy reported over 30,000 customers without power.

What an office notices afterwards:

    • the sensor works in some rooms but not others, because the imaging service did not start on every PC;
    • the practice software reports it cannot reach the database, because the server came up after the workstations;
    • printers or card terminals vanish, because the switch or firewall restarted in the wrong order.

The fix is unglamorous: battery backup on the server, the switch, the firewall and each imaging PC; an IT provider who checks that each battery still holds a charge; and a written order for bringing things back up. Legend's article on restarting vs power cycling in a dental office explains the difference staff need to know. The full power and heat plan for the valley lives in the Las Vegas guide linked above.

The office grew and the schedule got slower: what changed?

Growth adds load in places nobody upgrades at the same time. Each new chair brings another person into the database, more X-rays onto the server and more traffic through the switch, yet the server, switch and internet line are usually the originals. Rooms connected by Wi-Fi rather than a cable, and extra switches tucked into cabinetry, are frequent culprits.

Here is an example, not a client story. A Spring Valley practice adds three operatories to its six. The build-out contractor runs cable to two of them, and the third uses Wi-Fi. The server is five years old. Within a month, the front desk reports that the schedule is slow every morning and that X-rays take longer to open in the new rooms.

Growth slowdown table

What changedSymptomWhat to ask your IT provider
Extra chairs, same old serverAll desks lag in the busiest hoursHow busy are the server's disk and memory at opening time and at lunch?
New rooms on Wi-FiImages slow to open in those rooms onlyCan those rooms be cabled, and what is the Wi-Fi signal there?
A spare switch installed inside a cabinetNew rooms drop off now and thenWhat model is it, and what does it plug into?
Image archive grown over yearsOlder images slow to open; backups run longHow large is the archive and how long does the backup take?
Backup now runs into clinic hoursSlow at the same time dailyWhen does the backup start and finish?
Cloud software and image uploads on one internet lineHosted software slow while uploads runWhat uses the line during clinic hours?

The vendor's published system requirements are the starting point for sizing. Ask your IT provider to compare the server and workstations against them each time you add rooms.

Should a Las Vegas office run its practice software in the cloud or on a server?

Both work, and both still need local IT. A server in your closet keeps the schedule running if the internet drops, but you carry the backups, updates and hardware. Cloud software moves those to the vendor, but every room then depends on the internet line and the vendor's service. Choose by how your office fails, then plan for that failure.

Owners who prefer a server usually value offline access and accept that the risk of the hardware and backups sits with the practice. Owners who prefer cloud software accept that a slow line or an outage at the vendor stops every room. Neither side is wrong. They are choosing between different failure modes.

Table 3: Server or cloud, by what fails

QuestionServer in the officeCloud-hosted software
If the internet line dropsSchedule and charts keep working inside the officeEvery room loses the program unless a second line takes over
If the office loses powerServer down until power and a clean restartReachable from another office or a laptop on a hotspot
Who runs backups and updatesYour IT providerThe vendor, for the program and its data
Where imaging usually livesOn the same server or a local imaging serverOften still local; check with the vendor
What the office still needs locallyServer, battery backup, network, workstationsTwo internet lines, network, workstations, imaging PCs

Imaging is the detail many offices miss. Even with cloud practice software, sensors, drivers and often the image store remain on local computers, so local IT does not go away. Legend's guide to cloud-based dental practice management software covers the decision in more depth.

How should a Las Vegas group keep imaging working when offices run different versions?

Treat mismatched versions as a temporary state with an end date. While offices differ, decide which office's images a provider can open from elsewhere, keep referrals moving by export, and do not let anyone update one office's imaging without checking the others. Then close the gap in steps: one operatory, a checked restore, then room by room.

Groups that buy practices inherit whatever the seller ran. The North Las Vegas office you bought from a retiring dentist may run an older imaging version, or a different practice-management product entirely. Problems show up where offices share work:

    • a provider in one office cannot open images taken in another;
    • a patient who moves between offices arrives without their X-rays in the chart;
    • group reports do not match because the offices count differently;
    • one office's update breaks the bridge in another office that shares a server.

Our IT plan for a growing dental group in Las Vegas sets out how a group brings every office onto one standard.

What should you write down before you call?

Record when it began, which PC or operatory, whose login was active, the error as shown (a phone photo is fine), any recent change, how many computers are hit, and what has been tried. Five lines like that let the first person who answers start working instead of asking questions.

Table 4: Front-desk symptom log (print one per desk)

FieldExample
Date and time first seenTue 9:40 a.m.
Office and room or PC nameHenderson, Op 4
User signed inAssistant's own login
Program and exact error textImaging: "Device not found" (photo attached)
One PC, one office or allOp 4 only; Ops 1 to 3 capturing
What changed just before it startedWindows restart overnight
What you already triedDifferent USB port; reopened imaging from the chart
Patient impactOne patient rescheduled
Who you called and ticket number

Keep the log even when the fault fixes itself. A pattern across a week, such as a slowdown every day at noon or a sensor that drops after each restart, is often the evidence that finds the cause. A fuller list sits in the dental IT support ticket checklist.

Which systems does Legend list among those it supports?

On practice software, Legend names Dentrix, Eaglesoft, Open Dental, Archy. On imaging, Legend names DEXIS, Vatech, Carestream, Planmeca/Romexis, Dolphin Imaging. Support here means the IT environment those programs run on: workstations, servers, networks, drivers, bridges and backups. The vendor still owns its program.

Legend keeps a page per platform, for example Dentrix IT support, Eaglesoft IT support and Open Dental IT support. The overview of all of them is the dental software and imaging support page.

If you are deciding who should own these layers for a Las Vegas office, a few published facts apply. Legend: "Served over 3,500 practices since 2004." Staffing: "In-house engineers; no outsourced first-level triage." Delivery: "Onsite dispatch by appointment across served dental markets; remote-first nationwide." Day-to-day software and support issues are handled remotely; cabling, installations, equipment moves and new-office build-outs are scheduled onsite by appointment. Reviews: "4.8 rating · 173 Google reviews." Leadership: "Ian Lynch — 22 years in dental IT; oversees the NOC, onsite dispatch and client technology roadmaps." The monthly side is explained in managed IT for dental practices in Las Vegas.

What should you check before an upgrade or migration?

Back up the database and images and prove a restore works. Record image paths, bridge settings and each room's driver version. Confirm the vendor lists the new versions as compatible. Pick a window early in the day on a Las Vegas clock, when vendor lines are open. Upgrade one workstation, test it, then the rest.

Pre-upgrade list

    1. A new copy of the database and every X-ray, plus proof: a restore that a person opened and looked at.
    1. A written record of image storage paths, mapped drives and bridge settings for every room.
    1. Each room's sensor model and driver version, with a photo of the device settings.
    1. The vendor's compatibility notes for the new practice-management and imaging versions together.
    1. A window that leaves time to roll back, with the vendor's line open (Table 2).
    1. One workstation first, a test capture and a test claim, then the remaining rooms before the next first patient.

The dental software migration checklist covers the larger move from one product to another.

What to ask your IT provider about software and imaging

Ask these in writing, and compare the answers.

  1. When a fault could be the software, the imaging or the network, who traces it, and who calls the vendor?
  2. Does your published platform list include every program and imaging system we run?
  3. How are Windows, practice software and imaging updates tested before they reach operatory computers?
  4. At what time, on a Las Vegas clock, do our backups and updates run, and how do we see that they finished?
  5. Do you keep a room-by-room record of sensor models, driver versions and bridge settings?
  6. Where are our images stored, how are they backed up, and when was a restore last tested?
  7. After a power flicker, who checks that the server, switch and imaging services came back, and in what order?
  8. When a repair needs hands in our office, how is that visit booked, and how much notice is typical?

For how Legend handles these questions for practices in the valley, see our Las Vegas dental IT services page.

Key takeaways

    • Count the computers first: one PC points to that PC; every PC points to something shared; every office points to the database, cloud or link.
    • Each layer has an owner, and one party, usually the IT provider, should own the trace from symptom to layer.
    • Las Vegas keeps the same gap to Eastern and Central support lines all year; as published on 9 November 2026, several imaging lines closed mid-afternoon here, so check the vendor's page.
    • Battery backup and a written restart order prevent most post-flicker imaging trouble.
    • Log every fault with time, room, error text and what changed.

Sources

Vendor hours are as published on each vendor's own page on 9 November 2026 (check the vendor's page for current hours): Open Dental (contact page, Pacific Time), Dentrix (support page, MST), DEXIS (US contact page, ET), Vatech America (support page, Eastern Time), Carestream Dental (support page, Eastern), Dolphin Imaging (support page, Pacific Time) and Archy (contact page, in-app Help Center). The Patterson Eaglesoft support page refused the request, and no Planmeca page with hours opened. Clock changes: the NIST daylight saving time page. The July 2025 storm: FOX Weather's report on Clark County damage.

Questions

Frequently asked questions

How can a Las Vegas front desk tell if a slowdown comes from the software, the network or the server?

Ask whether it affects one computer or all of them, one office or every office in the group, whether it began after an update, and whether it happens at the same time each day. One computer points to that workstation. All computers point to the server, network or an update. Every office at once points to a shared database, cloud service or the internet.

What time do dental software support lines close in Las Vegas time?

As published on 9 November 2026, DEXIS closed at 3:00 p.m. on a Las Vegas clock, Carestream's imaging line at 4:00 p.m. and Vatech at 5:00 p.m., because they published Eastern hours; Open Dental and Dolphin Imaging published Pacific hours, and Dentrix listed hours in MST. Check the vendor's page for current hours. Nevada changes its clocks with Eastern states, so the time-zone gaps hold all year.

What should a Henderson or Summerlin office check first when a sensor stops capturing?

Plug the sensor into another USB socket on that PC and wait for Windows to chime. Try it in a second operatory. Ask whether Windows updated overnight. Launch imaging from the open chart so it receives the correct patient, and see whether other rooms are still saving X-rays. Leave driver reinstalls and bridge changes to whoever runs your IT.

Why do imaging workstations misbehave after a power flicker in a Las Vegas office?

A flicker can stop the server, switch and imaging computers mid-task. Imaging services may not restart, and workstations that come up before the server cannot find the database or image store. Battery backup on the server, network gear and imaging PCs, checked regularly, plus a written restart order owned by your IT provider, prevents most of these problems.

What should a Las Vegas office write down before calling about a software or imaging problem?

Note when it started, which office and which room or PC, whose login was active, the error exactly as shown or a phone photo of it, how many computers are hit, anything that changed lately, and the steps already tried. Add the patient impact and the ticket number once you call. A week of entries often reveals the cause.

Which practice-management and imaging systems does Legend list among those it supports?

For practice software Legend names Dentrix, Eaglesoft, Open Dental, Archy; for imaging it names DEXIS, Vatech, Carestream, Planmeca/Romexis, Dolphin Imaging. Support means the IT environment those programs run on, such as workstations, servers, networks, drivers, bridges and backups. Each product's vendor still owns the program itself, so some faults need that vendor's line.

Our practice software got slower after we added operatories in North Las Vegas or Spring Valley. Why?

Each added chair puts another user on the database, more X-rays on the server and more traffic through the switch, but the server, switch and internet line are usually unchanged. Wi-Fi rooms, a spare switch in a cabinet, or a backup now running into patient hours are frequent causes. Note the slow times for a week, then ask your IT provider to check the server.

How should a Las Vegas group keep imaging working when its offices run different software versions?

Treat it as temporary. Decide which images can be opened from other offices, move referrals by export, and stop any office from updating imaging without checking the others. Then align versions in stages: test on one operatory, move the data with a tested restore, and roll out room by room after hours, keeping the old data reachable until it is retired.

The bottom line

If the same slowdown, sensor fault or post-flicker restart keeps returning, write down the three that cost you the most time and bring them to a Free Dental IT Assessment. The findings come back in writing, so you can compare them with your current provider's answers to the questions above.

Ian Lynch
About the author

Ian Lynch

Owner & Operator, Legend Networking

22 years in dental IT. Oversees the NOC, onsite dispatch and client technology roadmaps for practices nationwide.

  • Operations center

    Dallas, Texas

    Serving dental practices nationwide since 2004

  • NOC hours

    24/7 monitoring

    Helpdesk staffed 24/7 at 1-800-794-1588

  • Engineers

    In-house only

    No outsourced first-level dental IT triage

  • Onsite dispatch

    By appointment

    Technicians deployed across served dental markets

About Legend Networking
Your next step

Send us the problems that keep coming back

Tell us what you are running and we will review it with you.

Or call 1-800-794-1588

Free IT assessment

Tell us what you are running

Your information is secure and will never be shared.